Disclosure : Some of the links in this post may be affiliate links.
If you have a broken badminton racket handle, don’t despair! There are a few easy steps you can follow to fix it. First, gather up supplies. You’ll need super glue, a putty knife, a toothpick, and sandpaper. Next, use the putty knife to scrape away any loose glue or debris from the broken racket handle. Once the surface is clean, apply a generous amount of super glue to the broken racket handle. Use the toothpick to help spread the glue evenly. Then, set the racket handle aside to dry. Once it’s dry, use the sandpaper to smooth away any rough edges. And that’s it! Your racket handle should be as good as new.
Contents
1. Gather the necessary materials
1. Gather the necessary materials. You’ll need a tube of super glue, a toothpick, and a paperclip.
2. Apply a small amount of super glue to the end of the toothpick.
3. Insert the toothpick into the broken badminton racket handle, using the paperclip to help guide it if necessary.
4. Apply pressure to the toothpick for a few seconds to make sure the glue sets.
5. Allow the glue to dry for 24 hours before using the racket again.
2. Remove the broken parts
If the badminton racket handle is broken, the first thing you need to do is remove the broken parts. This may require a screwdriver or other tool. Once the broken parts are removed, you can proceed to the next step.
3. Glue the handle pieces together
Take the two handle pieces and apply a generous amount of glue to one side of each. Join the pieces together, making sure that the glued surfaces are flush with each other. Use clamps or weights to hold the pieces in place while the glue dries.
4. Place the handle back in its original spot
If your badminton racket’s handle has come loose, don’t panic! You can easily fix it with a few simple steps.
First, remove the handle from the racket. Then, using a Phillips head screwdriver, remove the screws that are holding the handle in place. Next, align the holes in the handle with the holes in the racket, and insert the screws. Finally, tighten the screws until the handle is secure.
Now you’re ready to get back out on the court and start playing again!
5. Secure the handle with screws or bolts
If your badminton racket’s handle is broken, you’ll need to take it apart and secure the handle with screws or bolts. Here’s how to do it:
1. Start by removing the strings from your racket. You’ll need to use a racket string cutter or a sharp knife to do this.
2. Once the strings are removed, take off the grip tape.
3. Now you’ll be able to see the handle of your racket. Inspect it to see if it’s broken or just loose.
4. If the handle is broken, you’ll need to find a replacement. If it’s just loose, you can try to tighten it up with screws or bolts.
5. Once you have the handle secured, you can re-string your racket and put the grip tape back on.
6. Check to see if the handle is properly secured
If the handle of your badminton racket is loose or broken, it can be fixed relatively easily. First, check to see if the handle is properly secured. If it is, then you can simply tighten the screws or bolts that hold it in place. If the handle is broken, however, you will need to replace it. You can do this by removing the old handle and attaching a new one in its place. Make sure to secure it tightly so that it does not come loose during play.
7. Re-string the racket
If the handle of your badminton racket is broken, there’s no need to panic. While it may seem like a daunting task, re-stringing the racket is actually quite simple. All you need is a new string, a racket clamp, and a bit of patience.
First, remove the old string from the racket. You can do this by carefully cutting it away from the frame with a sharp knife. Next, attach the racket clamp to the frame of the racket. This will hold the racket in place while you work.
Now it’s time to start threading the new string through the racket. Start at the top of the frame and work your way down. Be sure to pull the string tight as you go. Once you reach the bottom of the frame, tie the string off and cut away any excess.
There you have it! Your racket is now fixed and ready for action.
8. Test the racket to make sure the handle is secure, and the strings are in place.
If your badminton racket handle is broken or loose, you’ll need to fix it before you can play again. Here’s how to do it:
1. Get a new handle. You can buy one from a sporting goods store or online.
2. Attach the new handle to the racket. Make sure it’s secure and tight.
3. String the racket. You can do this yourself or take it to a professional.
4. Test the racket. Make sure the handle is secure and the strings are in place.
5.Enjoy your game!
In conclusion, if your racket handle is starting to come loose, it is important to fix it as soon as possible. A loose handle can cause the racket to twist in your hand and make it difficult to control. It can also cause the strings to come loose, which can make the racket unplayable. With a few simple tools and a little time, you can easily fix a broken badminton racket handle.
Amazon and the Amazon logo are trademarks of Amazon.com, Inc, or its affiliates.
Hi there, my name is John Duong, and I'm a 10-year experienced badminton player. Badminton is my passion, and I've been playing the sport competitively since I was a teenager. Over the years, I've honed my skills, developed my technique, and gained valuable insights into the game.
